|
Scott Anderson has taken TrotBot to a new level. In addition to using modern Maker tools and gear, Scott reduced TrotBot's width by printing leg parts that link in-line, strengthened the upper leg parts by printing them as bend-resistant triangles, and added those cool hinged feet!
Scott's shares how he created his TrotBot here.
0 Comments
Leave a Reply. |
Ben VagleWelcome to DIYWalkers! I'm Ben Vagle, and I've been building mechanical walkers since I was 11 years old, both big and small. I started this blog to share what I've learned, and to collaborate with you. Let's see if we can take walkers to the next level! Categories
All
Archives
July 2019
|
RSS Feed